Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
Checked , belts, hoses, suspension steering, fluids ( coolant at -20f, brake fluid >1% moisture) Front brakes at 8mm, replaced air and cabin filters,
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
Meridith G. gave our service a 5 star review on 10/30/2025
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection. Road test vehicle.
Paula J. gave our service a 5 star review on 4/16/2025
AUTOMATIC TRANSMISSION FLUID – Check – F150 – [Includes: Scan Tool and Road Test.] Fluid is dark, pan is weeping but fluid is full. No active/present codes. Memory code P1702-00 Research code and typical issues related to code. Most likely cause of issue is a faulty trans range sensor. Suggest transmission repair shop for that repair.
Spencer Z. gave our service a 5 star review on 11/27/2024
All light functions at trailer plug in are there but replaced the unit because Steve mentioned he needed to wiggle the connector to get lights to function at times. There was no power to the "trailer charge circuit". Traced this issue to a missing Trailer charge circuit relay. ( #9 in underhood fuse panel.) This circuit is needed for the operation of hydraulic brake pump on trailer
Steve W. gave our service a 5 star review on 9/13/2024
FUEL FILTER – Remove & Replace – F250 Super Duty,F350 Super Duty,V8,Diesel,6.0L Eng Both – [Includes: Bleed System.]
No active codes.. Memory codes present are : P0299 Turbo underboost, P0234 Turbo overboost, C1236 LR wheel speed sensor input missing. Everything normal on road test, no chaffing or rubbing on sensor wires. ( Speed sensor is a common intermittent failure item $330 ) Exhaust back pressure sensor is also a high intermittent failure item for Turbo boost codes ) $290)
EXHAUST BACKPRESSURE SENSOR – Remove & Replace
Dave F. gave our service a 5 star review on 8/22/2024
Lubricate and visually inspect chassis, change oil and filter, check air filter, breather filter (where applicable) check all fluid levels,lights,and tire pressures,reset oil life reminders and road test
Remove fuel filters to check for water. Install new filters. No sign of water but primary filter is "sludgy" Let's change this filter again soon to monitor and figure out if anything else needs to be done or if this was a one time thing
Brake pads front and rear are all at least 60% remaining. No noises heard on road test. Brakes work properly.
Russ R. gave our service a 5 star review on 8/6/2024
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
Tire Rotation
Russel D. gave our service a 5 star review on 11/1/2023